function googleTranslateElementInit() { new google.translate.TranslateElement({pageLanguage: 'en', layout: google.translate.TranslateElement.InlineLayout.SIMPLE}, 'google_translate_element'); }
US Toll Free: 800.272.8946Outside US: 630.562.1400En Español: 630.628.7056
Need help fabricating parts?
Contact Manor Tool
Tools For Tubular Part Fabrication
For making angular pipe joints The Arc-Fit Angular tool produces a consistent accurate notch in pipe. Because this tool stamps out the notch, each tool is dedicated to a specific tube or pipe size at a specific angle. You can purchase multiple punch & die assemblies and swap them in our Arc-Fit Angular Housing to accommodate additional angles or material sizes.

Arc Fit Angular units are designed to produce angular notches on pipe and heavy wall tubing. The notch is ideally suited to welding with a rod or heavy wire. The resulting "V" at all contact points allows for full weld penetration without having weld buildup which must be ground down later. Each Arc Fit Angular Assembly consists of two punch and die assemblies requiring a total of (3) three strokes to complete the operation

How it works: The first station notches a deep notch with an elliptical end. One press stroke is needed in this station.

The second stations nip the left and right side walls completing the operation. Two press strokes required in this station

Each Arc-Fit Angular assembly is made for one size pipe to fit one size pipe (advise if not the same size) at one angle only. By not fully inserting the pipe in the first station, it may be possible to "cheat" and create a slightly shallower angle ( up to approx. 5°).

Arc-Fit Angular tooling is designed to be sharpenable for long life. Many customers order replacement parts first, then when received, send the old parts in for sharpening. This avoids any downtime and eliminates any expense for rush processing, overnight shipping, etc. Please contact us to obtain replacement part costs.

Watch Angled Tube Notching Video

Muescas Angulares

Unit of Measure
Items
Arc-Fit Angular

Arc-Fit Angular Unit
List Price $1,225.00

Arc-Fit Angular

Arc-Fit Angular Unit
List Price $1,695.00

Arc-Fit Angular

Spanker Bar
List Price $105.00

Arc-Fit Angular

Arc-Fit Angular Assembly
List Price $1,925.00

Arc-Fit Angular

Arc-Fit Angular Assembly
List Price $1,925.00
Description N/A For making angular pipe jointsThe Arc-Fit Angular tool produces a consistent accurate notch in pipe. Because this tool stamps out the notch, each tool is dedicated to a specific tube or pipe size at a specific angle. You can purchase multiple punch & die assemblies and swap them in our Arc-Fit Angular Housing to accommodate additional angles or material sizes.

Arc Fit Angular units are designed to produce angular notches on pipe and heavy wall tubing. The notch is ideally suited to welding with a rod or heavy wire. The resulting "V" at all contact points allows for full weld penetration without having weld buildup which must be ground down later. Each Arc Fit Angular Assembly consists of two punch and die assemblies requiring a total of (3) three strokes to complete the operation

How it works:The first station notches a deep notch with an elliptical end. One press stroke is needed in this station.

The second stations nip the left and right side walls completing the operation. Two press strokes required in this station

Each Arc-Fit Angular assembly is made for one size pipe to fit one size pipe (advise if not the same size) at one angle only. By not fully inserting the pipe in the first station, it may be possible to "cheat" and create a slightly shallower angle ( up to approx. 5°).

Arc-Fit Angular tooling is designed to be sharpenable for long life. Many customers order replacement parts first, then when received, send the old parts in for sharpening. This avoids any downtime and eliminates any expense for rush processing, overnight shipping, etc. Please contact us to obtain replacement part costs.
N/A For making angular pipe joints The Arc-Fit Angular tool produces a consistent accurate notch in pipe. Because this tool stamps out the notch, each tool is dedicated to a specific tube or pipe size at a specific angle. You can purchase multiple punch & die assemblies and swap them in our Arc-Fit Angular Housing to accommodate additional angles or material sizes.

Arc Fit Angular units are designed to produce angular notches on pipe and heavy wall tubing. The notch is ideally suited to welding with a rod or heavy wire. The resulting "V" at all contact points allows for full weld penetration without having weld buildup which must be ground down later. Each Arc Fit Angular Assembly consists of two punch and die assemblies requiring a total of (3) three strokes to complete the operation

How it works: The first station notches a deep notch with an elliptical end. One press stroke is needed in this station.

The second stations nip the left and right side walls completing the operation. Two press strokes required in this station

Each Arc-Fit Angular assembly is made for one size pipe to fit one size pipe (advise if not the same size) at one angle only. By not fully inserting the pipe in the first station, it may be possible to "cheat" and create a slightly shallower angle ( up to approx. 5°).

Arc-Fit Angular tooling is designed to be sharpenable for long life. Many customers order replacement parts first, then when received, send the old parts in for sharpening. This avoids any downtime and eliminates any expense for rush processing, overnight shipping, etc. Please contact us to obtain replacement part costs.

Assemblies for the model #85A Housing are made to order. Please Request Information or contact the factory at 800-272-8646 to discuss your specific application.
N/A Spanker Bar, required with Vogel CSP-25-SA Hydraulic Power Unit N/A Two-Station Assembly for 1” I.D., schedule 40 pipe for 35 degree stair rail N/A Two-Station Assembly for 1-1/4” I.D. schedule 40 pipe for 35 degree stair rail
The Arc-Fit Angular is designed for ONE angle of intersection between the centerline of the notched and mating pipes. 35º as shown in illustration below is standard, but other angles may be ordered. Please specify Pipe Size & Schedule (wall thickness), Mating Pipe Size and Angle of Intersection at time of order. Note that by not fully inserting pipe into first station, a slightly shallower angle can be created. The housing may be re-used with different assemblies to accommodate other pipe sizes, angles, etc.
Weight N/A 45 lbs N/A 135 lbs N/A 4 lbs N/A 20 lbs N/A 30 lbs
OD Max. Capacity N/A 1.90 in N/A 2-7/8 in N/A N/A N/A
Shut Press Requirements N/A 6 in N/A 6 in N/A N/A N/A
Stroke Press Requirements N/A 1 in N/A 1-1/2 in N/A N/A N/A
Tons Press Requirements N/A 15-20 N/A 30-45 N/A N/A N/A
Compatible Assemblies
and Press
N/A , Arc-Fit Angular Assembly ($1,925.00)
, Arc-Fit Angular Assembly ($1,925.00)
, Arc-Fit Angular Assembly ($1,925.00)
, Arc-Fit Angular Assembly ($1,925.00)
, Arc-Fit Angular Assembly ($1,925.00)
, Arc-Fit Angular Assembly ($1,925.00)
N/A N/A , Hydraulic Cage-Style Power Unit ($3,875.00)
N/A N/A
Pipe Max. Capacity N/A 1-1/2 in N/A 2-1/2 in N/A N/A 1 in N/A 1-1/4 in
Wall Max. Capacity N/A .200 in N/A .276 in N/A N/A .133 in N/A .140 in
Size- Left to Right N/A 10 in N/A 12 in N/A N/A N/A
Size- Front to Back N/A 8-1/8 in N/A 12 in N/A N/A N/A
Additional Options N/A Equal or unequal fit-ups, up to 1-1/2” I.D. Pipe, 2” O.D. or for tube sizes or angles ($2,350.00) N/A All #85-A Assemblies, equal & unequal fit-ups ($3,750.00) N/A N/A N/A
Compatible Housing N/A N/A N/A N/A , Arc-Fit Angular Unit ($1,225.00)
N/A , Arc-Fit Angular Unit ($1,225.00)
Outer Diameter Max. Capacity N/A N/A N/A N/A N/A 1.66 in
Angle of Intersection N/A N/A N/A N/A 35 º N/A 35 º
Close