800.272.8946Call
function googleTranslateElementInit() { new google.translate.TranslateElement({pageLanguage: 'en', layout: google.translate.TranslateElement.InlineLayout.SIMPLE}, 'google_translate_element'); }
Need help fabricating parts?
Contact Manor Tool
Tools For Tubular Part Fabrication
  • piercing01

    Vogel Perf-Arc units offer both low cost and versatility for your piercing applications. Units can be used individually, or in multiples, to pierce all holes in a part simultaneously. DD style units pierce a hole top & bottom in unit, and may be ordered to produce one size hole on top and a different size on bottom. Punches are easily sharpenable. Because Perf-Arc units contain the full circumference of the tube, no OD bulging will occur. Units are self-stripping. Each tool is made for a specific size tube and hole, up to maximums shown in charts below. Demountable units may be easily changed to new hole sizes simply by ordering additional perforators.

  • piercing02

    Vogel Perf-Arc units offer both low cost and versatility for your piercing applications. Units can be used individually, or in multiples, to pierce all holes in a part simultaneously. DD style units pierce a hole top & bottom in unit, and may be ordered to produce one size hole on top and a different size on bottom. Punches are easily sharpenable. Because Perf-Arc units contain the full circumference of the tube, no OD bulging will occur. Units are self-stripping. Each tool is made for a specific size tube and hole, up to maximums shown in charts below. Demountable units may be easily changed to new hole sizes simply by ordering additional perforators.

  • piercing03

    Vogel Self-Contained Perf-Arc units use a single punch to produce a dimpled hole on the top of the tube and a clean hole on the bottom of the tube.

    These units are self-contained and require mounting on the base only.  Since the slug from the top wall is used to pierce the bottom wall, the slug cannot be retained in the tube, eliminating secondary handling to remove a slug from the ID of the tube.

  • dimple_chart

    Use in punch presses, press brakes, air or hydraulic presses. Vogel Perf-Arc vertical piercing units offer a flexibility and adaptability which reduces both set up time and costs.

    Perf-Arc units are designed for when unsupported piercing is acceptable. Unsupported piercing means the tube will deform or "dimple" around the pierced hole.

    All Perf-Arc tools can be used singly or in multiples of two or more and can be positioned adjoining one another, spaced apart or at angles to pierce tubing which has been bent prior to piercing. All units are self stripping. Self contained units can be mounted directly to the bolster plate or sub-plates. Demountable units are split units which must be mounted both top and bottom preferably in a die set. Demountable units are also available keyed, top & bottom for direct mounting into most press brakes - pls. advise at time of order.

  • Image

    Perf-Arc Model 627: Up to 1-1/4" round or square tubing, up to 1/2" hole diameter
    Perf-Arc Model 637: Up to 2" round or square tubing, up to 3/4" hole diameter
    Perf-Arc Model 647: Up to 3" round or square tubing, up to 1" hole diameter
    Perf-Arc Self-Contained Units - Dimpled hole top, Clean hole bottom

Close